--- Typical Booster Operation ---
• Equalize the pressure between one your DOT air cylinders and your SCBA cylinder.
• If the desired pressure is not obtained, simply start cycling your booster to finish filling to the desired pressure. (60 cycles per minute.)
• Stop the booster when the desired fill pressure is obtained.
The booster shown above comes equipped with 3000 PSI oxygen transfer hose with CGA 540 nut & nipple, oxygen fill hose with oxygen yoke and bleed valve. Also equipped with high pressure relief valve, inlet and outlet 5 micron filters, remote set pilot valve to automatically start and stop the booster.